Assembly Instructions for Our E-Bikes
Your bike was completely inspected, serviced, and securely packed for transport in our workshop. Now your new LikedBike has arrived. This guide will help you assemble it easily, safely, and at your own pace.
Before You Start: What You Need
- Allen keys in common sizes
- 15 mm wrench or Allen key (depending on the pedals)
- Torque wrench optional, recommended
💡
What We Loosened or Removed Before Shipping
For safe shipping, the following parts were removed or placed in a transport position, among others:
- Pedals removed
- Handlebar turned sideways and lowered
- Brake levers turned downwards
- Display removed on some models
Thanks to our assembly instructions, you can correctly reassemble everything in just a few steps.
From a Rideable E-Bike in 8 Steps
Step 1 – Unpack and Inspect the Delivery
- Check the shipping packaging for visible damage and document it.
- Carefully open the box and remove the bike and accessories.
- Check the frame, wheels, and components for visible transport damage.
- Keep the packaging until you have assembled and inspected everything.
⚠️ Important in Case of Transport Damage: Note any visible damage directly on the delivery note and contact us with photos (box, bike, delivery note). This way we can help you quickly: info@likedbikes.com.
💡
Step 2 – Align the Handlebar
- Loosen the Allen screws on the stem.
- Turn the handlebar straight in the direction of travel and then adjust the angle so that the grips sit comfortably in your hands.
- Then tighten the screws evenly again.
💡
Step 3 – Adjust the Brake Levers
- Position the brake levers so that you can reach them easily and comfortably from your riding position.
- Then secure the levers at the desired angle and tighten the screws.
💡
Step 4 – Install the Pedals
- Pay attention to the R (right) and L (left) markings from the direction of travel.
- Important: The pedals have left-hand threads and are screwed in counterclockwise.
- First carefully place the pedals by hand and then tighten them firmly but with a delicate touch.
Step 5 – Adjust the Seat and Handlebar Height
- Set the seat height so that your knee is slightly bent when your foot is at the lowest point of the crank.
- The stem or handlebar should allow you to maintain a relaxed posture: with relaxed shoulders, a forward gaze, and without overextending.
💡
Step 6 – Install the Display (if Separate, as with Intuvia and Kiox)
- Attach the display bracket to the handlebar.
- Check the electrical connections and ensure that everything is securely attached without being under tension.
💡
Step 7 – Functional Test
- Turn on the display and start the system.
- Check that all functions work correctly by turning the light on and off, cycling through the assistance levels, and testing the walk assist.
💡
Step 8 – Final Safety Check
- Tire Pressure: The recommended pressure is stated on the tire sidewalls.
- Brakes: The brake levers should be firm and the brake pads should not rub against the discs or rims.
- Gears: All gears should shift smoothly.
- Screws: Stem, handlebar, seat post, pedals – everything should be securely attached.
⚠️ Test Ride: Start with a short ride – preferably without traffic – and check the braking and shifting. After the first few kilometers, you can briefly recheck the fasteners. To ensure you can ride safely in the long term, you should take your bike to a specialist workshop for an inspection once a year or approximately every 2000 km.
Help and Warranty
Do you have questions or is something wrong? Send us an email with your order number, a brief description of the problem, and, if possible, photos or videos to: info@likedbikes.com. Our one-year LikedBikes warranty covers, among other things, the motor, battery, display, control unit, and frame (cracks and breaks).
If you like, we can also help you with the ergonomically perfect setup (seat height, handlebar, and grips). We also answer some questions in our detailed FAQ.
Enjoy your LikedBike!